These signs are available in either 6" or 9" high x necessary length*. The 6" signs are usually used for neighborhood streets and the 9" signs are usually used in major intersections. Check with your local Street Department to verify what is required in your area. These signs are available in these two configurations... Flat .080 aluminum with a Hi-Intensity reflective finishExtruded aluminum with a Hi-Intensity reflective finish The extruded aluminum sign panels have thicker top and bottom edges that are 1/4" thick. The flat aluminum sign panels are .080" or approximately 3/32" thick.
*Necessary length is based
on the length of the name - signs are usually 18", 24", 30" or 36"
long. You can request one of these specific sizes or otherwise we will
determine it for you. Remember
to add "ST" or "AVE" or whatever you need, we don't add anything to
what you type. All street signs are done using ONLY upper case letters.
For example, if you wanted a sign that said " S MAIN ST ".
You would enter "S" in the "Leading" letters. You would enter "MAIN"
in the "Middle" letters and enter "ST" in the "Ending" letters. If you want the same size letters for the entire sign, then leave the "Leading" and "Ending" fields blank.
The
Letter size for the 6" signs are 2" (Leading), 4" (Middle), 2"
(Ending). For the 9" signs, the sizes are 3" (Leading), 6" (Middle)
and 3" (Ending).
These signs ARE all double sided in that the street name is printed on both the front and the back side of the signs.
STANDARD ABBREVIATIONS
- Boulevard - BLVD
- Circle - CIR
- Court - CT
- Drive - DR
- Junction - JCT
- Loop - LOOP
- Avenue - AVE
- Parkway - PKWY
- Place - PL
- Road - RD
- Street - ST
- Terrace - TERR
- Way - WAY
- Lane - LN
**These signs REQUIRE 5 to 10 working days to produce. This is NOT a "Quick-Ship" item.
If you need street sign brackets, they are available HERE.
|