*Only valid when shipping to the lower 48 states.
PD-55 Pneumatic Post Driver
Net 30 Terms:
This option is available for government agencies
and corporations with preapproved credit.
A signed purchase order is required.
Item Name: PD-55 Sign Pneumatic Post Driver
Item Code: PD-55
You have to provide enough air capacity and a filter-regulator-lubricator. The PD-55 uses 42 CFM (1.17 m3/min.) @ 90 PSI (6.5 kg/cm2) Approx. Wt. 54.6 lbs.. For minimum compressor requirements, we recommend the 40 CFM KAESER portable screw compressors. For higher altitude work you will need a bigger compressor like the VANAIR Viper 70 CFM rotary screw compressor. You can always use a large 185 CFM "pull-behind" compressor and just choke the air down to 42 CFM at the compressor.
The filter-regulator-lubricator (not included with PD-55) assures that you have clean air with consistent pressure and ten drops of oil per minute. Throttle kit and regulator and hose are not included.
The PD-55 comes with a "master chuck". The "master chuck" is a 3 7/8" cylinder. You can get the optional U-Channel post "chuck adapter" to drive U-channel sign posts.
|Wording on Sign||NA|
|Primary Construction Material||NA|
|Overall Assembled Height||NA|
|Overall Assembled Width||NA|
|Sign Panel Height||NA|
|Sign Panel Width||NA|
|Item Weight in Pounds||62|
|One or Two Sided||NA|
|Works with this type of sign|
|Sign Stand Type||NA|